Cut Tile With No Water.

Ceramics. Porcelain. Marble. Stone.

The iQTS244 Dry Cut Tile Saw

ORDER NOW

Retail price $1590 includes one (1) blade. Stand sold separately for $150. Replacement blades are $99.

 

Cut Tile With No Water.

Ceramics. Porcelain. Marble. Stone.

The iQTS244 Dry Cut Tile Saw

ORDER NOW

Retail price $1590 includes one (1) blade. Stand sold separately for $150. Replacement blades are $99.

Stop Dealing With The Pain Of Cutting Wet

If you’ve been in the tile business for any amount of time, you know the pain of cutting with water:

Location

Most often a driveway, garage or back yard, outside and away from the job.

Setup

Finding a water source, setting up tarps, hoses, buckets and spray guards.

Cleanup

Messy and time-consuming disposal of slurry and contaminated water.

Problems cutting with water are more than just a pain.
They cost your business time and money.

The World’s First Dry Cut Tile Saw With Integrated Dust Control

waterless tile saw
“Commercial installers will go nuts over this! Lots of down time making cuts in different areas and messes with wet saws. It will pay for itself in the first job”

A Dustless Tile Saw With the Precision & Versatility of a Wet Saw

The best tile saw for professional contractors: this 10-inch, dry cut tile saw saves one hour per day or more in costly setup & cleanup time while keeping the operator dry.

best dry cut tile saw
iQTS244 Dustless Tile Saw Vacuum System

1. Vacuum System

  • Cyclone technology tested to capture 99.5% of dust
  • 92 CFM high output vacuum
  • Saw automatically starts vacuum

2. Filter System

  • Three-stage filtration
  • Quick-Spin® filter for easy cleaning
  • 11 sq ft iQ Dura Bond filter
iQTS244 Dustless Tile Saw Filter System
iQTS244 Dustless Tile Saw Dust Containment System

3. Dust Containment

  • Empty dust tray once a day
  • Easy cleanup and recycling
  • Meets OSHA’s new 2016 silica standard
iQTS244 Dustless Tile Saw Vacuum System

1. Vacuum System

  • Cyclone technology tested to capture 99.5% of dust
  • 92 CFM high output vacuum
  • Saw automatically starts vacuum
iQTS244 Dustless Tile Saw Filter System

2. Filter System

  • Three-stage filtration
  • Quick-Spin® filter for easy cleaning
  • 11 sq ft iQ Dura Bond filter
iQTS244 Dustless Tile Saw Dust Containment System

3. Dust Containment

  • Empty dust tray once a day
  • Easy cleanup and recycling
  • Meets OSHA’s new 2016 silica standard

The Best Tile Saw For Professional Contractors

With fully-integrated dust collection technology, this innovative design combines the power of a top of the line tile saw with a powerful cyclonic vacuum.

The result is a dustless tile saw that cuts clean, efficient and precise, with no water, no slurry and virtually no heat—even with hard materials.

Beat The Heat

How does it cut dry without heat problems?

Tile pros know: heat is a factor. So how can you cut tile dry without water cooling the blade?

The answer is Q-Drive blade with Cool Cut Technology.

Q-Drive™ Blade
Our proprietary composition of diamond concentration, metal type, and flange thickness cuts cool while reducing vibration and movement.

  • Engineered to cut tile dry
  • Blade stays cool to the touch
  • No warping or wandering
  • Precision cuts match the quality of a wet blade

Built-In Vacuum
The built-in vacuum on the iQTS244™ air-cools the blade while removing debris, so the blade isn’t regrinding the same material, reducing friction and heat.

Cool Cut Technology

Our specially engineered Q-Drive™ Blade with built-in vacuum cooling cuts tile on average at 10°-15° F above ambient air temperature.

Beat The Heat

How does it cut dry without heat problems?

Tile pros know: heat is a factor. So how can you cut tile dry without water cooling the blade?

The answer is Cool Cut Technology.

Q-Drive™ Blade
Our proprietary composition of diamond concentration, metal type, and flange thickness cuts cool while reducing vibration and movement.

  • Engineered to cut dry
  • Blade stays cool to the touch
  • No warping or wandering
  • Precision cuts match the quality of a wet blade

Built-In Vacuum
The built-in vacuum on the iQTS244™ air-cools the blade while removing debris, so the blade isn’t regrinding the same material, reducing friction and heat.

Cool Cut Technology

Our specially engineered Q-Drive™ Blade with built-in vacuum cooling cuts tile on average at 10°-15° F above ambient air temperature.

 

ORDER YOUR iQTS244

Pre-order today! That’s thousands of cuts without a drop of water—while breathing fresh, clean air.

ORDER NOW

Retail price $1590 includes one (1) blade. Stand sold separately for $150. Replacement blades are $99.

“I can’t wait to show my customers how I can set this saw up in their kitchen and have no fear that my cutting will effect their home.”
iQTS244 Dry Cut Tile Saw
 

The Benefits of Cutting Dry

It’s much more than convenience. Cutting tile without water has a major impact on your speed, your work day, your profitability and your business.

 

Setup Time

iQTS244

approx. 30 Seconds

  • Easy transport
  • Plug it in
  • Start cutting

Traditional Wet Saw

Approx. 17 minutes

  • Find a location
  • Set up tarps, hoses, buckets and spray guards
  • Get water everywhere anyway

Cleanup Time

iQTS244

Approx. 1 minute

  • Quick breakdown
  • Easy transport
  • No slurry cleanup, no water disposal

Traditional Wet Saw

30+ minutes

  • Breaking down your cutting station
  • Cleaning up slurry
  • Disposing of contaminated water

Cutting Location

iQTS244

Where You’re Setting

  • Small spaces and sensitive environments
  • No water source required, no water damage
  • Measure, cut, set—with no walking

Traditional Wet Saw

Not Where You’re Setting

  • Driveways, garages and outdoors
  • Finding a water source
  • Walking back and forth all day
“Fewer steps to the saw, little mess to clean up and faster install means more money, a happier contractor, and happy customers.”

Why deal with the pain of cutting wet?

“This saw will be a game changer in protecting our employees from silica and efficiency in the field.”

Smart, Innovative Power Tools For Professional Contractors

iQ Power Tools manufactures a comprehensive range of professional power tools with integrated dust collection systems for concrete, masonry, hardscape and tile contractors.

Founded by third-generation masons with over 30 years in construction, iQ has been providing the industry with tough, construction grade tools for over 15 years.

The iQ vision is a 100% dust-free construction business, creating safer job sites, healthier work practices, contractors with higher profits per job, and a long-term sustainable industry.

Stop The Slop: Cut Dry, Dust-Free

How many more tarps will you lay down and water buckets will you dump in the next week, month or year? How many more hours of cleanup can you afford?

Don’t waste one more hour dealing with water. Stop the pain of cutting wet with the iQTS244.

Construction-Grade Toughness

We understand construction and the stress it puts on your tools. The iQTS244™ is built for the demands of everyday construction and a heavy workload, it’s easy to maintain and will last for years.

  • High impact materials
  • 1-year limited warranty
  • Tens of thousands of cuts in testing

The Versatility You Demand

As a tile pro, you need to cut a variety of materials using a myriad of cutting techniques. With a 10” blade, full-width table and 24″ cut capacity, the iQTS244™ can handle even the trickiest and most technical tile jobs.

  • 24” rip cuts
  • 18” diagonal cuts
  • Cutting depth: 1″

ORDER YOUR iQTS244

Cut Dry, Make More Money With the Best Tile Saw for Contractors

ORDER NOW

Retail price $1590 includes one (1) blade. Stand sold separately for $150. Replacement blades are $99.

Proud Member

 

iQ manufactures dry cutting power tools with integrated dust collection for the tile, concrete, masonry and hardscape industries. Our professional tools help contractors eliminate problems caused by dust and cutting with water.

No Dust. No Water. No Problem.