iQ Power Tools

This unsubscribe link is not valid.

The link may have expired or already been used. If you are still receiving emails you do not want, contact our support team and we will take care of it.

Back to iqpowertools.com

iQ Power Tools: dry-cut masonry and tile saws with integrated dust collection iQ Power Tools manufactures dry-cut masonry saws, tile saws, cyclonic HEPA dust extractors, and Q-Drive diamond blades. Cutting is done dry, with dust captured at the blade instead of carried in water or left in the air. Saws and dust extractors

iQMS362i 16.5" Dust Control Masonry Saw : 5.5" cutting depth, 24" cutting length.

iQ1550 21.5" Masonry Saw : 8" cutting height, three-stage HEPA filtration, 75 lb dust capacity.

iQ252 10" Dry Cut Rail Saw : 52" rip and 36" diagonal capacity for large-format tile.

iQTS244 10" Dry Cut Tile Saw : 24" rip, 18" diagonal, built-in vacuum and cyclone.

iQ228CYCLONE 7" Dry Cut Tile Saw : 36 lb portable table saw.

iQ426HEPA Cyclonic Dust Extractor : four-stage filtration including HEPA H14.

Silica dust compliance Independent air monitoring conducted by ALS Global Environmental Laboratory showed operator respirable crystalline silica exposures below OSHA's 50 µg/m³ permissible exposure limit when iQ saws are used with their integrated dust collection systems as intended. Employers may use the objective data and exposure assessment provisions of OSHA 29 CFR 1926.1153. Read the silica dust compliance guide , the silicosis overview , or build a dust control plan . Blades, parts, and support Find the right blade with the Q-Drive blade finder , shop parts and accessories , register a tool for warranty coverage , or contact the team at 888.274.7744 and svc@iqpowertools.com .