MOST POPULAR21.65″ Q-Drive Arrayed Segmented Super Hard Material Blade
CMU block, hard concrete, dense masonry
SKU MASQX22-141-QD-HM3
$515.00
Q-DRIVE DIAMOND BLADES
EVERY BLADE SIZE.
ONE LINEUP.
Q-Drive blades are built to pair with iQ saws, from the 7 inch Cyclone up to the 21.5 inch iQ1550. Start with your blade size, then match the bond to the material you cut.
BLADE SIZE
21.5″
The biggest blade in the lineup suits the iQ1550, with enough diameter for deep cuts through block, brick, and large format hard material.
FITS iQ1550 · 21.65″ blade diameter
MOST POPULAR
21.65″ Q-Drive Arrayed Segmented Medium Soft Combination Blade
Brick, clay block, concrete and clay pavers
SKU MASQX22-141-QD-KP
$515.00
21.65″ HM4 Silent Core Extreme Hard Material Blade
Dense porcelain, hard granite, quartzite
Silent core
SKU MASX22-141-QD-HM4SC
$515.00
BLADE SIZE
16.5″
A 16.5″ Q-Drive blade for the iQMS362i. The widest lineup of bonds in the catalog, so you can match the blade to the material instead of compromising.
FITS iQMS362i · 16.5″ blade diameter
MOST POPULAR16.5″ Q-Drive Arrayed Segmented Super Hard Material Blade
Hard block, dense concrete, abrasive masonry
SKU MASQX16-125-QD-HM3
$310.00
16.5″ Q-Drive Hard Concrete Orange Blade, Silent Core
Hard concrete, curbs, foundations
Silent core
SKU MASQX16-125-QD-HM2
$310.00
16.5″ Q-Drive Hard Brick Blade, Silent Core
Brick, clay block, softer masonry
Silent core
SKU MASQX16-125-QD-HM1
$310.00
16.5″ Q-Drive Medium Soft Combination Blade, Silent Core
Mixed materials, pavers, general masonry
Silent core
SKU MASQX16-125-QD-KP
$259.00
16.5″ Q-Drive Porcelain Blue Blade
Large format porcelain and paver slabs
SKU PRCX16-090-QD-HM
$310.00
16.5″ HM4 Extreme Hard Material Blade
Hard stone, granite, dense porcelain
SKU MASX16-125-QD-HM4
$310.00
16.5″ HM4 Silent Core Extreme Hard Material Blade
Hard stone and porcelain where vibration shows in the cut
Silent core
SKU MASX16-125-QD-HM4-SC
$325.00
BLADE SIZE
14″
Three 14″ Q-Drive blades built for the iQ360XT: a general purpose bond, our platinum bond, and the platinum silent core for cleaner cuts and less noise.
FITS iQ360XT · 14″ blade diameter
MOST POPULAR14″ iQ Ultimate Orange Silent Blade
Brick, block, and general masonry
SKU MAS14-125AP
$239.00
14″ Platinum Silent Core Masonry Blade
Hard masonry and stone, with quieter, smoother running
Silent core
SKU MAS14-125AP-QT
$280.00
14″ General Purpose Laser Welded Blade
Everyday cutting across mixed job site materials
SKU MAS14-125AG
$103.00
BLADE SIZE
10″
MOST POPULAR10″ Q-Drive Plus Tile Blade, Platinum Combo
Ceramic, porcelain, and mixed tile
SKU TLD10060PQDCOMBO
$71.00
10″ Q-Drive Plus Tile Blade, Platinum Hard Material
Granite and harder porcelain
SKU TLD10-060P-QD-HARDMAT
$103.00
10″ Q-Drive Plus Tile Blade, Hard Material HM4
The hardest porcelain and dense stone
SKU TLD-10-HM4
$103.00
10″ Q-Drive Turbo Cutter, Hard Material and Porcelain
Fast cuts through hard material and porcelain
SKU TLD10-080P-QD-HM2
$103.00
10″ Q-Drive Plus Tile Blade, Marble
Marble and soft natural stone
SKU TLD10-060P-QD-MB1
$103.00
10″ Q-Drive Plus Finishing Touch Blade
Final, clean-edge passes after the cut
SKU TLD250-1.4P-QD-NX
$103.00
BLADE SIZE
7″
Compact 7″ Q-Drive blades for the iQ228 Cyclone. Two bonds cover most tile and paver work on small and mid-size jobs.
FITS iQ228 Cyclone · 7″ blade diameter
MOST POPULAR7″ Q-Drive Tile Blade, Combo
Ceramic, porcelain, pavers, mixed materials
SKU TLD07-005P-QD-Combo
$61.00
7″ Q-Drive Tile Blade, Hard Material
Hard tile, stone, and dense pavers
SKU TLD07-005P-QD-HM1
$61.00
THE ‘Q’ SEAL OF QUALITYiQ DIAMOND TOOLS
WHY Q-DRIVE® BLADES CUT DIFFERENT
Our innovation doesn’t stop at saws. Through years of experience and testing, we have perfected our proprietary blades with the perfect ratio of high diamond to metal powder concentration. iQ Diamond Tools exceed the demands of the professional contractor.
Optimized for rigorous work environments and designed with unparalleled durability, iQ Diamond Tools Q-Drive® Diamond Blades get the job done, cutting materials from hard ceramic tiles to highly abrasive bricks and blocks with speed, ease, and precision.
When you see the ‘Q’ seal of quality, you can be sure that it is backed by over three decades of industry experience and quality craftsmanship.
Cool Cut Technologie
Dust and slurry are pulled away before the rim can regrind them, so the blade runs cooler and holds its edge longer.
Arrayed segmented rim
Segments are arranged to clear the cut fast in tile, block, brick, and concrete, with silent cores where the job calls for one.
Material specific bonds
Each bond is built for one family of material, from HM1 brick to HM4 extreme hard, instead of one compromise across all of them.
Sized to the saw
Every blade matches the iQ saw it runs on, from the 7 inch up to the 21.65 inch, so the vacuum and the rim work together.
Q-DRIVE® is a registered trademark of iQ Power Tools.
MATCH THE BLADE TO THE JOB
BEST BLADE BY MATERIAL AND CUT
Find what you are cutting and the cut you need. Each row names the blade we recommend, the saw it fits, and why it wins on that job.
| What you are cutting | Best blade | Fits | Why it wins | Buy |
|---|---|---|---|---|
| Porcelain & ceramic tileClean, chip-free cutsTOP PICK | 10″ Q-Drive Plus Platinum Combo10″ · $71.00 | iQ252 · iQTS244 | The do-it-all tile bond. Cuts soft ceramic and mid-hard porcelain without blowing out the glaze edge. | |
| Hard porcelain, rectified slabsDense, through-body material | 10″ Q-Drive Plus Hard Material HM410″ · $103.00 | iQ252 · iQTS244 | The hardest tile bond in the 10″ family. Holds its edge in dense porcelain other blades glaze over on. | |
| Large format slabsLong straight cuts, no wander | 16.5″ HM4 Silent Core Extreme Hard Material16.5″ · $325.00 | iQMS362i | Silent core keeps the blade from ringing and deflecting, so long slab cuts stay true. | |
| Marble & soft natural stoneNon-staining, smooth finish | 10″ Q-Drive Plus Marble10″ · $103.00 | iQ252 · iQTS244 | A soft bond built for stone that scratches and stains, so the cut face comes out clean. | |
| Granite, quartzite, dense stoneHard material, heavy cuts | 16.5″ HM4 Extreme Hard Material16.5″ · $310.00 | iQMS362i | Extreme hard material bond for the stone that eats general purpose blades. | |
| Tile & stoneFast production cutting | 10″ Q-Drive Turbo Cutter10″ · $103.00 | iQ252 · iQTS244 | Tall turbo segments clear debris fast, so you trade a little finish for a lot of speed. | |
| Tile & stoneFinal finish pass | 10″ Q-Drive Plus Finishing Touch10″ · $103.00 | iQ252 · iQTS244 | Run it after your main cut to take off chips and leave a factory-looking edge. | |
| Brick & clay blockGeneral masonry cutting | 16.5″ Q-Drive Hard Brick, Silent Core16.5″ · $310.00 | iQMS362i | Bond tuned for abrasive brick, so it keeps cutting instead of polishing itself smooth. | |
| CMU block & hard masonryHeavy production cuttingTOP PICK | 16.5″ Q-Drive Arrayed Segmented Super Hard Material16.5″ · $310.00 | iQMS362i | Arrayed segments stay sharp in block and hard masonry, the workhorse pick for wall work. | |
| Hard concrete, curbs, foundationsReinforced or dense pours | 16.5″ Q-Drive Hard Concrete Orange, Silent Core16.5″ · $310.00 | iQMS362i | Built for dense concrete and the vibration that comes with it, with a silent core to match. | |
| Mixed materials, pavers, demoOne blade for everything | 16.5″ Q-Drive Medium Soft Combination, Silent Core16.5″ · $259.00 | iQMS362i | Combination bond handles pavers, block and mixed loads when you do not want to swap blades. | |
| Deep cuts in large blockMaximum depth of cut | 21.65″ Q-Drive Arrayed Segmented Super Hard Material21.5″ · $515.00 | iQ1550 | The largest diameter in the lineup reaches depths the 16.5″ blades cannot on tall block. | |
| Noise-sensitive jobsResidential or occupied sites | 14″ Platinum Silent Core Masonry14″ · $280.00 | iQ360XT | Sandwich core kills the ring, so you cut quieter and smoother in tight neighborhoods. | |
| Everyday job site cuttingGeneral purpose, budget | 14″ General Purpose Laser Welded14″ · $103.00 | iQ360XT | The value pick for crews cutting whatever the day brings, no special bond needed. |
MATCH THE BLADE TO THE CUT
NOT SURE WHICH BOND YOU NEED?
Tell the blade finder which saw you run and what you cut. It points you to the exact Q-Drive blade for that material, with the size already confirmed.
YOUR NEXT GREAT CUT STARTS HERE.
PUT iQ TO WORK.
Find an authorized dealer. Get the right tool for your next job.