TILE & FLOORING
SETUP. OPERATION. JOBSITE SUPPORT.
The iQTS244 is a 10-inch dry cut tile saw with integrated dust containment. This guide covers the overview, unboxing and assembly, operation and first cut, and blade replacement.
Contact the rental location directly to confirm equipment availability, rates, and rental requirements.
OVERVIEW
A quick look at the iQTS244 before you pick it up, plus the specifications to plan your cuts around.
The iQTS244 cuts ceramic, porcelain, marble, and stone with the appropriate blade, without a water supply. A built-in vacuum and cyclone system collects dust while a 10-inch Q-Drive blade makes the cut, with 24 inches of rip capacity and 18 inches of diagonal capacity.
The saw runs on 120 V / 17 A and weighs 93 lb. Rental units commonly include the X-Stand and a 10-inch combo blade, so confirm what comes with the saw when you reserve it.
SETUP & OPERATION
Work through each module before your rental, then keep this page open as a refresher on the jobsite.
How the iQTS244 cuts dry and what to expect from the saw on tile work.
Setting up the saw and stand so the table and rails are square and stable.
Controls, material support, and the first dry cut on tile.
Removing and reinstalling the 10-inch blade.
RESOURCES
Model-specific manuals and pages for the iQTS244.
These guides are supplemental resources. Always follow the iQTS244 operator's manual and the instructions provided by the rental location.
KEEP EXPLORING
READY TO CUT?
Locate a rental partner near you and confirm the tool for your next job.
YOUR NEXT GREAT CUT STARTS HERE.
Find an authorized dealer. Get the right tool for your next job.