iQ1550
Welcome to the iQ1550 Video Learning Hub
Welcome to your step-by-step guide for getting the most out of your iQ1550. Whether you’re setting up for the first time, choosing the right blade, or shutting down after a long day on the job, this guide will walk you through everything you need to know.
What will you learn?
The iQ1550 isn’t just a saw—it’s a productivity powerhouse built to deliver precision, performance, and cleaner job sites. Our video library breaks down the entire user experience so you can:
• Set up with confidence
• Cut with precision
• Maintain for longevity
• Master every attachment and feature
What to Expect:
iQ1550 ships in a protective crate or heavy-duty box. You’ll need a few basic tools:
Have your Operator’s Manual handy—this guide is supplemental.
Setup Steps
• Unbox and inspect all parts.
• Attach the rolling base (if disassembled).
• Install the blade if not already installed.
• Tighten all bolts and verify stability.
• Perform a visual check of louvers, blade guard, and blade cover.
Safety & PPE Overview
• Safety Glasses (Mandatory)
• Ear Protection (Mandatory)
• Gloves (Recommended)
• Safety Shoes (Recommended)
⚠️ Follow local job site PPE requirements—this may include hard hats, high visibility vests, or respirators.
Introduction and Overview
Dig deeper into the smart features that make the iQ1550 the leader in dry-cut technology.
Assembling Your iQ1550
iQ1550 ships in a heavy-duty box.
You’ll need a few basic tools:
Have your Operator’s Manual handy—this guide is supplemental.
Steps:
• Unbox and inspect all parts.
• Attach the rolling base (if disassembled).
• Tighten all bolts and verify stability.
• Install blade if not already installed.
• Perform a visual check of louvers, blade guard, and blade cover.
✅ Pro Tip: Watch our time-lapse video with callouts on areas that need your attention.
Safety & PPE Overview
Required PPE:
• Safety Glasses
• Ear Protection
• Gloves
• Safety Shoes
• Dust Mask
⚠️ Follow local job site PPE requirements—this may include hard hats, high visibility vests, or respirators.
Worksite Guidelines:
• Operate on a level, stable surface.
• Avoid using in rainy or wet conditions.
• Ensure adequate ventilation.
✅ Pro Tip: Review this before every job. Safety is step one.
Choosing the Right Blade
Blade Specs:
Blade Size: 21.5"
Arbor: Q-Drive only (iQ exclusive)
Material Compatibility: Concrete, masonry, pavers, hard brick, granite
Available Blades:
• Q-Drive Combo Blade (Standard)
• Q-Drive Super Hard Material Blade
✅ Pro Tip: Only use iQ blades to maintain dust control and cutting efficiency.
👉 [View Full Blade Catalog]
First Cut & Start-Up
⚙️ What’s Covered: Powering up and performing your first clean cut.
Pre-Cut Checklist:
• Correct extension cord (25ft / 30amp)
• Power plug in good condition
• Blade installed and secured with wrench
• Dust collection port clear and bin installed
• Louvers clean and not worn
• Rolling track slides smoothly
• Saw arm raises/lowers freely
Blade Maintenance: Dressing the Blade
🧽 What’s Covered: How and why to dress your blade.
• Why Dress the Blade?
• Removes glazing
• Restores cutting performance
• Prolongs blade life
Clean-Up & Shut Down
🧹 What’s Covered: Proper end-of-day care.
• Shut Down Steps:
• Power off and unplug the saw
• Confirm blade is stopped and locked
• Unlock and remove dust tray
• Empty dust into safe container
• Run filter knob a few turns
• Re-check and empty tray again
• Wipe down or air-blow saw housing and louvers
• Inspect moving parts, including tracks and rollers
