iQMS362i
Welcome to the iQ362i Video Learning Hub
Welcome to your step-by-step guide for getting the most out of your iQ362i. Whether you’re setting up for the first time, choosing the right blade, or shutting down after a long day on the job, this guide will walk you through everything you need to know.
What will you learn?
The iQ362i isn’t just a saw—it’s a productivity powerhouse built to deliver precision, performance, and cleaner job sites. Our video library breaks down the entire user experience so you can:
• Set up with confidence
• Cut with precision
• Maintain for longevity
• Master every attachment and feature
What to Expect:
iQ362i ships in a protective crate or heavy-duty box. You’ll need a few basic tools:
Have your Operator’s Manual handy—this guide is supplemental.
Setup Steps
• Unbox and inspect all parts.
• Attach the rolling base (if disassembled).
• Mount the saw arm to the base securely.
• Tighten all bolts and verify stability.
• Perform a visual check of louvers, blade guard, and blade cover.
Safety & PPE Overview
• Safety Glasses (Mandatory)
• Ear Protection (Mandatory)
• Gloves (Recommended)
• Safety Shoes (Recommended)
⚠️ Follow local job site PPE requirements—this may include hard hats, high visibility vests, or respirators.
Introduction and Overview
Dig deeper into the smart features that make the iQ362i the leader in dry-cut technology.
Assembling Your iQTS244
iQ362i ships in a heavy-duty box.
You’ll need a few basic tools:
Have your Operator’s Manual handy—this guide is supplemental.
Steps:
• Unbox and inspect all parts.
• Attach the rolling base (if disassembled).
• Mount the saw arm to the base securely.
• Tighten all bolts and verify stability.
• Perform a visual check of louvers, blade guard, and blade cover.
✅ Pro Tip: Watch our time-lapse video with callouts on areas that need your attention.
Safety & PPE Overview
Required PPE:
• Safety Glasses
• Ear Protection
• Gloves
• Safety Shoes
• Dust Mask
⚠️ Follow local job site PPE requirements—this may include hard hats, high visibility vests, or respirators.
Worksite Guidelines:
• Operate on a level, stable surface.
• Avoid using in rainy or wet conditions.
• Ensure adequate ventilation.
✅ Pro Tip: Review this before every job. Safety is step one.
Choosing the Right Blade
Blade Specs:
Blade Size: 16.5"
Arbor: Q-Drive only (iQ exclusive)
Material Compatibility: Concrete, masonry, pavers, hard brick, granite
Available Blades:
• Q-Drive Combo Blade (Standard)
• Q-Drive Hard Material Blade
• Q-Drive Asphalt Blade
✅ Pro Tip: Only use iQ blades to maintain dust control and cutting efficiency.
👉 [View Full Blade Catalog]
First Cut & Start-Up
⚙️ What’s Covered: Powering up and performing your first clean cut.
Pre-Cut Checklist:
• Correct extension cord (10-gauge, 50' max recommended)
• Power plug in good condition
• Blade installed and secured with wrench
• Dust collection port clear and bin installed
• Louvers clean and not worn
• Rolling track slides smoothly
• Saw arm raises/lowers freely
Blade Maintenance: Dressing the Blade
🧽 What’s Covered: How and why to dress your blade.
• Why Dress the Blade?
• Removes glazing
• Restores cutting performance
• Prolongs blade life
Clean-Up & Shut Down
🧹 What’s Covered: Proper end-of-day care.
• Shut Down Steps:
• Power off and unplug the saw
• Confirm blade is stopped and locked
• Unlock and remove dust tray
• Empty dust into safe container
• Run filter knob a few turns
• Re-check and empty tray again
• Wipe down or air-blow saw housing and louvers
• Inspect moving parts, including tracks and rollers
