Cut dry with no dust

Brick. Pavers. Stone. Veneer.
The iQ360XR Dust Control Table Saw

ORDER NOW
iQ 360XR Dust Control Table Saw

Vacuum System

A powerful vacuum sucks the dust.

iQ 360XR Dust Control Table Saw

Filter System

Dust is captured in the cartridge filter.

iQ 360XR Dust Containment

Dust Containment

Dust is contained in the lower tub.

The iQ360XR tested to capture up to 99.5% of the dust

  • No water – 100% dry cutting
  • Collect up to 99.5% of the dust
  • Cut right where you work, even indoors
  • Eliminate dust cleanup and problems
  • OSHA Compliant

The iQ360XR™ is a game-changing tool for professionals. Cutting with no dust contractors can now save money, eliminate the mess and pain of dust problems and protect the health of their workers.

ORDER YOUR iQ360XR NOW
 

A Money-Making Tool

Cleanup
If you have to pay one guy $15/hour to clean up dust every day, for one hour, that adds up to $300 a month.

Wasting Time
If your guy has to walk outside or across the job site to make every cut, doing 150+ cuts a day while hauling materials, he spends an hour or more just walking back and forth, another $300+ a month.

Just using those figures – which are conservative for many contractors – that adds up to $600 per month or $7,200 a year. It can cost even more. Have you ever had to power wash a building? Pay for a customers car wash, or pay to clean their windows? Most of us have experienced at least one of these. They’re rarely cheap, never fun, and they cut straight into your profits.

Controls cost money too. Personal protective equipment, tarping off your cutting area and cutting wet all cost money, they’re all a pain and they’re marginally effective.

The iQ360XR™ eliminates
A) dust cleanup
B) wasted time
C) the cost of marginally effective controls.

This tool makes your business more profitable.

ORDER YOUR iQ360XR NOW

Is Dust Costing You?

Use the iQ Power Tools cutting costs worksheet to calculate the cost of using your current saw.

Know How Much You Spend on Dust
iQ 360XR Dust Control Table Saw

Cut Right Where You Work

With the iQ360XR™ you can cut right where you’re laying materials – even inside.

iQ 360XR Dust Control Table Saw

Finish Jobs Faster

Cutting right where you work and no dust cleanup allows you to save time and finish your jobs fast.

Built Tough

The iQ360XR™ is tough, built for professionals and designed to last. With basic maintenance – like changing the filter once a year – your iQ360XR™ will last for years.

iQ360XR Dust Control Table SawORDER YOUR iQ360XR NOW

  • 14″ Masonry Saw for Brick Stone & Pavers
  • New sealed rocker power switch
  • Soft Start technology reduces AMP draw on start up
  • Fully-Integrated Dust Collection System
  • Tested to Capture 99.5% of the Dust
  • Compact & Lightweight—Easy to Transport
  • Made of Tough High-Impact Materials
  • Wide Table Design Allows for Cutting Larger Materials
  • Quick-Spin™ Filter for Easy Cleaning

Specifications

VOLTAGE: 120v
TOTAL SYSTEM AMPERAGE: 20amps
SAW MOTOR AMPERAGE: 15amps
VAC MOTOR AMPERAGE: 5amps
SAW WEIGHT: 65lbs
DIMENSIONS: 17″w × 20″l × 30″h
BLADE SIZE: 14″
SPINDLE SIZE: 1″
FILTER TYPE: iQ Dura Bond Cartridge
CUTTING DEPTH: 4.5″H x12″L
DUST CAPACITY: 1 cu ft
SAW DIMENSIONS: 17″W x 20″L x 30″H
EXTENSION CORD: 25ft/12 guage or 50ft/10 guage
GENERATOR: 4500 watt

Maximize Versatility With iQ360XR Accessories

iQ360XR Dust Control Table Saw

iQSmartCart™

  • High Position allows you to cut while standing
  • Low Position allows you to cut while crouching
  • Cut right on your scaffolding
  • Indoors, basements, living rooms, enclosed patios, even the office
  • Made of Tough High-Impact Materials
  • 10″ inch high flotation tires allow you to easily roll the iQ360XR™ around the job site
SEE ALL ACCESSORIES
iQ 360XR Dust Control Table Saw

iQRollingTable™

  • Easily roll materials through your cuts
  • Quick install and removal
  • Rubber cutting surface
  • Precision roller guides
SEE ALL ACCESSORIES

QuickSpin Easy Filter Cleaning

Turn the handle to clean the filter. This turns an agitator knocking the dust off the filter into the dust bin. This filter lasts for one year.

ORDER YOUR iQ360XR NOW

Increase Your Quality

Picture this, your guy laying materials 50 feet from the saw. He walks back hauling his cut material and finds his cut was off by 1/4″. At 4:00 PM after working all day there’s a chance he’s just going to lay it there rather than walk all the way back to fix his cut.

Clean-cutting right where you work with the iQ360XR™ it’s a quick fix without another trip to the saw. Over the course of an entire job that makes a quality impact.

Market Your Business

Use the iQ360XR™ as a competitive advantage to earn more business, and start saying this to your prospective customers:

“We use iQ Power Tools, which means dust will be a non-issue on this job. We won’t be blowing dust all over the job site, we won’t have to clean up dust every day, dust won’t be getting all over your [house/car/property], and people in the area (coworkers, family, kids) won’t be breathing hazardous silica dust. We can also cut right where we’re working, so we can finish the job a lot faster.”

“Using the iQ360XR™ we get jobs done fast with better quality. It’s kind of our secret for earning business – I hope other contractors in my area don’t figure it out.” –Mike M., Masonry Contractor

Why We Know About Dust Problems

iQ Power Tools was founded by third generation masons Joel and Paul Guth. We owned and operated successful masonry companies for over 30 years, at times with over 100 employees.

Decades of experience taught us about dust problems. It makes a huge mess, it costs a great deal of money, and it’s a threat to the health and safety of our industry.

ORDER YOUR iQ360XR NOW

Market Your Business

A: There is no water, the iQ360XR™ cuts 100% dry.
A: The vacuum system sucks the dust from the cutting point into the filter system.
A: The iQ360XR™ is designed to cut masonry products. Wood, plastic and metal will damage the filter and void the warranty.
A: 11 ½ in (start to finish) varies with thickness of materials
A: We recommend 4 inches or less with saw locked and no table
A: Generally no, as long as the operator is using blades specifically designed for dry cutting.
A: A standard 3000w to 4500w generator. We recommended a Honda EU3000iS.
A: Yes. For angle cuts and 45° cuts, mark and cut like a regular table saw