fbpx

iQ2000 Heavy Duty Dust Collection for 20″ & 24″ Masonry Saws

 

Take the saw to the cuts Inside or Out

iQ2000 Series - Heavy-Duty Dust Collection System for 20" and 24" Masonry Saws

iQ 360XR Dust Control Table Saw

Industrial Design

The heavy-duty, industrial design of the iQ2000 Series Masonry Saw is durable and will carry you through your projects with confidence.

iQ 360XR Dust Control Table Saw

HEPA Cap

The Optional HEPA Cap is an ACCESSORY (sold separately) which adds a higher filter standard to the iQ2000 Series.

iQ 360XR Dust Containment

Dust Control

The iQ1014S is built with a shroud to contain the dust collection to the location underneath the saw.

iQ 360XR Dust Containment

Versatility

With a Cutting Depth of 5" (12" Length, material up to 30 lbs), the iQ1014S is able to handle large format materials and cut block without a second thought.

NO MORE SETTING WET BRICK & BLOCK


Image

The iQ2000 Series Heavy-Duty Dust Collection System for 20” & 24” Masonry Saws

A Dry cut masonry, concrete, and stone products while maintaining a safe, dust-free work environment.

Available in electric and gas-powered models.

  • Durable design for industrial application
  • Powerful Vacuum with easy-clean filter system
  • Fits most conventional 20” & 24” masonry saws

COLLECT THE DUST IN THE BASE

Find me a saw that cuts dry & does so with better precision. The iQ2000 Series Saws are a collection of Heavy Duty Saws welcome on any mason's job site & always ready to help complete your projects quickly and with superb precision.

Occupational Safety & Health Administration

Image

OSHA Compliant

Our systems meet all state and federal OSHA regulations and the Army Corps of engineers EM385

• Meets OSHA’s 2020 silica standard
• Tested to capture 99.5% of dust
• White paper reports available
• Compliant in all 50 States

iQ SMART POWER MANAGEMENT

iQ 360XR Dust Control Table Saw

Electric Tool Power Outlet

The Electrical Tool Power Outlet enables you to plug in a power tool which will automatically start the vacuum once the tool is activated. While some vacuums allow you to manually dial down the power being drawn to accommodate for the tool, one unique feature of the iQ426HEPA is that it will intelligently distribute power between the tool and the dust extractor, giving your tool additional power when it temporarily needs it, while still maintaining a level below the maximum power set by the Power Supply Selector.
iQ 360XR Dust Control Table Saw

Power Supply Selector

The iQ426HEPA is equipped with a Power Supply Selector allowing you to choose between 15 AMP and 20 AMP power sources depending on the environment you are working in. The iQ426HEPA is designed so that the total amount of power being drawn (by both the iQ426HEPA and any connected Power Tool combined) should not exceed the amperage set by the Power Supply Selector. Having the iQ426HEPA regulate the maximum power drawn will minimize tripped circuit breakers and maximize work performance.
iQ 360XR Dust Containment

On/Off Auto Switch

The ON/OFF Auto Switch allows you the flexibility of using the dust extractor independently or while operating a power tool that requires simultaneous dust collection. Selecting AUTO will immediately enable the Autostart feature, which will automatically start the vacuum whenever your power tool is in use. Once the power tool comes to a complete stop, dust collection will continue for an additional 10 seconds to collect any excess dust or debris that needs to be collected.
iQ 360XR Dust Containment

HEPA Filter Status Light

The HEPA Filter Status Light is another intelligent feature of the iQ426HEPA since it executes a real time analysis of the filter's status based on it's current condition. The measurement is NOT time based, and it is NOT usage based, it is a real-time measurement of the current condition of the filter. Once you eventually see this light up, you'll know that it is definitely time to change your HEPA filter. Don't be surprised if you don't see this turn on for a long time, don't worry, the light works, it's that your filter is still good.

Dust Containment

From the top of the blade to the dust collection bin, the iQ1014S Portable 14" Masonry Saw with Industrial Dust Collection is making sure to control the Silica particles coming off of the material.

We've taken great lengths to make sure that we are containing those dust particles and mitigating silicosis.

The iQ1014S utilizes 60 square feet of Cotton Satin filters and an Easy-Clean shake pedal to remove dust from filters to the dust tray.

Image Image
iQ1014S
VOLTAGE / FREQUENCY 220 VOLTS
POWER / AMPS 15AMPS
AIRFLOW 1000 CFM
NOISE LEVEL &83 dbA
POWER CABLE 10 FEET
SYSTEM WEIGHT 200 LBS
BLADE SIZE 14" BLADE
CUTTING DEPTH 5" (12" LENGTH, MATERIAL UP TO 30 LBS)
DUST CAPACITY 60 LBS
SYSTEM DIMENSIONS 32"W X 35"L X 64"H
SHIPPING WEIGHT 75/34
PRICE $9,390

ITEM # DESCRIPTION PRICE
iQ1014S iQ Portable Dust Collection
$9,390
X